The Linux Ultra-DMA Mini-Howto

Brion Vibber, [email protected]

Archived Document Notice: This document has been archived by the LDP.

1. Introduction and Disclaimer

• 1.1 Disclaimer
• 1.2 Credits
• 1.3 Document History
• 1.4 Copying

2. What is Ultra-DMA and why do I want it?

• 2.1 IDE, EIDE, & ATAPI
• 2.2 Bus Master DMA
• 2.3 Ultra-DMA aka Ultra-ATA aka Ultra33 aka...
• 2.4 Just how ``Ultra'' is it anyway?
• 2.5 How does UDMA compare to SCSI?

3. Using your UDMA hard drive with an EIDE interface

4. Using your hard drives with a UDMA interface

5. Offboard PCI UDMA interfaces

• 5.1 Promise Ultra33
• 5.2 Promise Ultra66
• 5.3 Artop ATP850UF
• 5.4 Adding device files

6. Onboard UDMA interfaces

• 6.1 Intel FX, HX, VX, TX, LX, and BX
• 6.2 The VIA VP2 and Related Chipsets
• 6.3 TX Pro and other ``Pro'' boards
• 6.4 HPT 366

7. Unified IDE Patches

8. Activating and Deactivating UDMA

• 8.1 Using kernel boot parameters
• 8.2 Using hdparm

9. Problems

• 9.1 The UDMA Blacklist
• 9.2 Are you overclocking?
• 9.3 Is your BIOS current?
• 9.4 If you still can't get it to work!

10. If you have some information about UDMA stuff that's not in this mini-howto...