Hogar  |  Mapa  |  Indice  |  Busqueda

Revisiones de Harware

Artículos dedicados al hardware, su uso y configuración bajo Linux.

• A digital DC power supply -- part 3: command control from the PC
  A very small an really powerful DC power supply for your hobby lab. In this third part. We make it possible to remotly control the DC power supply via a command line interface.

• A digital DC power supply -- part 2: the software
  very small an really powerful DC power supply for your hobby lab. In this second part I explain how the software works and one more feature is added.

• A digital DC power supply
  A very small an really powerful DC power supply for your hobby lab. It has lots of features which you normally find only in very expensive power supplies. This one is however cheap, small and easy to build.

• lcdproc -- LCD displays easy to use and easy to build
  In this article we use lcdproc to connect a LCD display and 2 buttons to a linux pc; simple and easy to build for everybody.

• LF Tip: solving the ugly key problem
  Good looking alternatives to the Windows key.

  
  
• Part 2 -- A digital thermometer or talk I2C to your atmel microcontroller
  In this second part of the article we will connect a LCD display and I will explain how the software works.

• A digital thermometer or talk I2C to your atmel microcontroller
  In this article we see how to interconnect the microcontroller to a linux PC over a physical RS232 interface without the extra MAX232 chip.

  
  
• Fn-F12: Hibernate a IBM Thinkpad T20 laptop
  How to get hibernate (suspend-to-disk) to work on an IBM Thinkpad T20 with no windows installed

• Programming the AVR Microcontroller with GCC, libc 1.0.4
  How to program the Atmel AVR Microcontroller with GCC. An update of the March 2002 article for libc 1.0.4

  
  

• Test: pre-installed Linux Notebooks
  This is a review of notebooks from linuxcertified.com

  
  

• Let's do some electronics
  Software to develop electronic circuits? Yes, it's available for Linux too. This article will show you what you need.

  
  

• Temperature monitoring with Linux
  This article shows how you can add for about 10 Eur a termperature supervision to your server.

  
  
• A 1 Bit Data Scope
  This article describes a 1bit logic analyser which samples data and sends it to a Linux PC via the rs232 port.

• Building an autonomous light finder robot
  In this article we describe how to build an autonomous robot that will always try to walk to the brightest spot in the room.

  
  
• Measuring air pressure with Linux
  This article describes an inexpensive solution to messure air pressure with a Linux PC.

• A Microcontroller based DC power supply
  In this article we build a very robust Microcontroller regulated power supply for your "lab" at home.

  
  
• Hardware watchdog and shutdown button
  This is a simple circuit to connect to the serial line of your computer.

• A LCD control panel for your Linux server
  In this article we use an Atmel AT90S4433 microcontroller and a few other inexpensive parts to build a LCD control panel for a Linux server.

  
  

• Programming the ARV Microcontroller with GCC
  The article explains how to setup a GCC development environment for the AVR 8-bit risc Microcontroller series from Atmel.

  
  

• How to use your ATEN UC-232A USB adapter with Linux
  The ATEN UC-232A is a RS232 serial line to USB adapter.

  
  

• Atek Super Mini Optical Mouse
  This is a miniature mouse that makes your notebook perform like a desktop

  
  

• Construción de un robot caminante controlado mediante Linux
  In this article you learn how to build a small walking insect and control it with Linux over the parallel port.

  
  

• A serial line shutdown button with control LED
  In this article we design a little push button to connect to your server on the serial line and which you can use to shut the machine down when needed.

  
  

• Displays LCD por puerto serie bajo Linux
  This article show how to use the BLC2021 PC-Bay Insert serial line display from Matrix Orbital under Linux.

  
  

• El kit uCsimm
  This article describes the uCsimm kit and the UClinux project: Porting the linux kernel on hardware without MMU (memory management unit).

  
  

• Receptor de mando a distancia con RT-Linux
  In this article a simple electric circuit is used to process commands from any infra-red remote control.

  
  

• El Proyecto F-CPU: Intentando el "más difícil todavía"
  The fPU project attempts to develop a microprocessor like the present ones allowing a development scheme close to the one guiding important free software projects.

  
  

• Teclado "Happy Hacking"<BR> Revisión del producto
  Product review of the Happy Hacking Keyboard

  
  

• Instalaci�n y Configuraci�n de un Sistema RAID
  RAID (Redundant Array of Inexpensive Disks) consists of a series of systems to organize several disk drives into a single entity that behaves as a single virtual drive but making the various disks work in parallel thus improving the access performance and saving the information stored from accidental crashes.

  
  

• Un veh�culo autoguiado basado en Linux
  This ariticle describes a Linux based robot as developed at the Universidad Politecnica de Valencia

  
  

• 3 lbs, 31,000 pies y 3 vasos de vino a 397.31 bogomips-Linux y el Sony Vaio 505gx
  How to install Linux on a Sony Vaio 505gx

  
  

• GNU/Linux en un Fujitsu 635T
  How to install Linux on a Fujitsu 635T laptop

  
  

• Revisi�n hardware:<br> Programando en OpenGL & GLUT con la tarjeta Voodoo 3dfx
  How to program OpenGL on a Voodoo 3Dfx graphic card.

  
  

• Getting Linux to Run a Computer with an Alpha CPU
  The author share with us his experiences putting together an Alpha PC

  
  

• 3Dfx graphics card
  3Dfx Interactive's 3D chipset is changing the world of high-end graphics.

  
  

• Setting Up a ZIP drive on an Alpha platform
  Tips for users of a DEC-Alpha